Roofline Christmas Lights, Cut to Fit Your Home
Commercial-grade C9 LEDs on wire we measure and cut to your exact roofline — clean corners, full ridgelines, no gaps, no dangling cord. Installed, maintained, removed, and stored for one price.
Roofline lighting is the core of every great display: C9 LED bulbs on commercial socket wire, custom-cut to your home's exact roofline — ridges, gables, and corners included. DFW market pricing runs about $5–$12 per linear foot full-service, with most single-story homes at $700–$1,200 and two-story homes at $1,000–$1,800. Install, mid-season repairs, January takedown, and storage are all in the price. Quotes are free.
What "Commercial-Grade" Actually Means
It's not marketing language — it's a different product category from anything on a store shelf.
| Commercial C9 LED (what we install) | Store-bought strands | |
|---|---|---|
| Fit | Socket wire cut to your roofline's exact length — every run ends precisely at a corner or gable point | Fixed 25-ft lengths — gaps at one end, a coil of spare cord at the other |
| Bulbs | Large faceted C9 LEDs, individually replaceable, spaced evenly on the wire | Molded-on mini or midsize bulbs; one bad section often means replacing the strand |
| Failure mode | One dark bulb stays one dark bulb — and we come replace it free | Whole sections go dark; you troubleshoot on a ladder |
| Look from the street | Even spacing, uniform color temperature, crisp lines | Mixed brightness and color temperature between strands and seasons |
| Who stores it | We do — labeled for your home, inspected before re-install | Your attic, your tangle |
Measured, Cut, and Hung Like It's Permanent
Measure
We map your roofline — eaves, ridges, gables, dormers — and decide with you which lines get lit. The best displays trace architecture; they don't outline everything.
Cut & build
Socket wire is cut to each run's exact length and bulbs are set in your pattern before install day. Corners land on a bulb, not mid-gap.
Hang & test
Purpose-made clips grip shingles and gutters — no screws or nails in your roof. Every run is tested on a timer before the crew leaves.
Light up
Dusk-to-off automatic. If anything goes dark before New Year's, we come back and fix it at no charge.
Three Looks That Never Miss
Because bulbs snap into sockets individually, your pattern is a choice — not whatever the store had in stock.
Warm White
The most-requested look in DFW's upscale neighborhoods. Reads elegant against brick and stone, photographs beautifully, and never clashes with your landscaping lights.
Multicolor
The classic. Red, green, blue, and gold in rotation — the look most of us grew up with, executed with even spacing and uniform brightness.
Patterns
Red-and-white candy cane, alternating warm white and red, or accents that mark gables and peaks. Easy to set, easy to change next season.
What Roofline Lighting Costs in DFW
Current market ranges from published Dallas-area cost data — your quote is based on your actual roofline, and it's free.
| Home Type | Typical DFW Market Range |
|---|---|
| Single-story roofline | $700 – $1,200 |
| Two-story roofline | $1,000 – $1,800 |
| Full-service per linear foot | $5 – $12 / ft |
Market data, not a quote — full breakdown and what drives price on the DFW cost page.
What Pairs With a Lit Roofline
A crisp roofline is the frame; tree wraps and landscape lighting fill the yard, and a lit wreath over the entry finishes the shot. Most homes in Flower Mound, Southlake, and Frisco combine at least two layers — and one quote covers all of it.
Roofline Lighting Questions
What are C9 bulbs, and why do installers use them?
C9 refers to the classic large faceted bulb shape — roughly two inches tall — that professional displays are built on. Modern C9 LEDs give the traditional big-bulb look with low power draw and a long lifespan, and they snap into sockets on commercial wire that's cut to length, so the run fits your roofline exactly instead of ending wherever a store strand happens to end.
Warm white or multicolor — which looks better?
Warm white is the most-requested look in DFW's upscale neighborhoods — it reads elegant and works with any brick or stone. Multicolor reads classic and festive, and red-and-white patterns give a candy-cane look. Because our bulbs snap into sockets, patterns are easy to set and easy to change between seasons.
Will installation damage my roof or gutters?
No. Lights attach with purpose-made plastic clips that grip shingles, gutters, or ridgelines — no screws, nails, or adhesive on your roofing. Clips come down with the lights in January and leave nothing behind.
How long does a roofline install take?
Most single-family installs are done in a few hours; large two-story homes with complex ridgelines can take the better part of a day. Your lights are measured and cut before install day, so time on-site is hanging and testing, not fabricating.
Are the lights on a timer?
Yes — displays run on outdoor timers so the lights come on at dusk and shut off when you want, automatically. You never flip a switch all season.
What happens if a bulb or section goes out?
We come fix it at no charge — in-season maintenance is part of every full-service install. Commercial socket wire also fails more gracefully than consumer strands: one dark bulb doesn't take down the whole run.
What does roofline lighting cost in DFW?
Published DFW market data puts full-service roofline programs at roughly $5–$12 per linear foot, with single-story homes typically $700–$1,200 and two-story homes $1,000–$1,800. Those are market ranges, not a quote — your exact price depends on your actual roofline, and quotes are free.
Get Your Roofline Priced
Under a minute, no obligation. We'll text or call you back with a ballpark for your home.
Get My Free Quote
Step 1 of 2 — tell us what you'd like lit.
Prefer email? Reach us at [email protected].